Mold Remediation · Sunrise, FL
Mold remediation and removal for Sunrise condos and homes
In Sunrise, mold tends to turn up on the far side of someone else's leak: the wall you share with a neighbor, or the ceiling under a unit that was closed all summer. We trace the moisture across units, contain the growth, and remove it.
- 24/7 emergency line
- IICRC Certified Firm
- Insurance claim documentation
On call 24/7
Free inspection
Schedule a no-cost on-site inspection. A restoration specialist will contact you within a few minutes to confirm the details.
Request received
Thank you. A restoration specialist will contact you at the number provided to confirm the details. If water is still coming in, call now and we'll walk you through shutting it off.
(954) 289-0566Mold Remediation in Sunrise
Mold remediation in Sunrise often begins with a question about a wall: whose water was it? In Sunrise Lakes and the other condo and villa communities, a water heater or supply line on one side of a shared wall can keep the drywall on the other side damp for weeks. The owner who finds the mold is frequently not the owner with the leak.
So the first visit is about facts. The mold inspection is free: we look for visible growth, take moisture readings on each face of the wall we are given access to, and use thermal imaging to follow the damp area back toward its source. You get a written scope, and when more than one unit is involved, each owner and the association get the findings for their own part.
The single-family side of the city has a different pattern. Homes in Sunrise Golf Village, Springtree, and Welleby date from the 1960s through the early 1990s, and growth there usually traces to an air handler closet, a slow drip under a kitchen or bathroom cabinet, or an old leak that was dried only on the surface. If water is still getting in, water damage restoration in Sunrise comes first.
The work is done under Florida Mold Remediator License MRSR438. Lab testing, when an association, insurer, or buyer asks for it, is performed by a Florida-licensed mold assessor, and we arrange it.
Your family's health
Is mold in your home a health risk?
It can be. The CDC says damp, moldy conditions can cause a stuffy nose, sore throat, coughing or wheezing, burning eyes, or a skin rash in some people, and people with asthma or mold allergies may have severe reactions.
As mold grows, it releases spores into the air your family breathes. Take extra care when there are babies or young children in the home: the CDC points to a potential link between early mold exposure and asthma developing in some children.
Book the free mold inspection as soon as you suspect mold. The sooner the moisture is fixed and the growth is gone, the shorter everyone is exposed and the smaller the job. Until then, keep children and anyone sensitive out of the affected area.
We are restoration professionals, not doctors. If anyone in your home has symptoms, talk to your doctor or pediatrician. Sources: CDC: Mold and your health, EPA: A Brief Guide to Mold, Moisture and Your Home.
Local factors
What's different about mold remediation in Sunrise
-
Shared walls in Sunrise Lakes
Buildings from the 1970s and early 1980s put one unit's water heater closet against the next unit's bedroom or hallway. Growth can be heavier on the neighbor's side than at the source, so both sides need to be checked before either is repaired.
-
Units closed for part of the year
A condo left through the summer with the air conditioning off and a toilet valve seeping can have growth on closet walls, behind furniture, and inside cabinets by the time the owner returns. The job is often wide and shallow: many surfaces, little demolition.
-
1980s homes in Springtree and Welleby
Original air handlers, supply valves, and shower pans in these homes are at the end of their service life. Mold usually shows first at the base of the AC closet wall or on the back of the vanity cabinet.
-
Shops and offices near Sawgrass Mills
A flat roof that ponds or a sprinkler line that weeps leaves ceiling tile and the top of the drywall damp above a tenant space. We contain the affected bay and schedule the work around opening hours where the landlord allows it.
Our process
How does mold remediation work?
- 01
Inspect and find the moisture
We inspect for visible growth and use moisture meters and thermal imaging to find wet materials and what is wetting them: a leak, condensation, or an old water loss that never dried.
- 02
Build containment
The work area is sealed with plastic sheeting and zippered doors. Larger jobs get an entry chamber so crews can come and go without carrying spores out.
- 03
Negative air and HEPA scrubbing
HEPA-filtered air machines draw air out of the containment, keeping it under negative pressure so air flows in, not out, while the work is underway.
- 04
Remove contaminated materials
Drywall, insulation, carpet, and other porous materials with growth are cut out, bagged inside the containment, and taken out of the building.
- 05
Clean what stays
Framing, block, and other solid surfaces are HEPA-vacuumed and wiped. Stained wood is sanded or wire-brushed, and a final HEPA vacuuming collects settled dust.
- 06
Dry and correct the cause
Remaining materials are dried to normal readings. The moisture source has to be repaired before walls are closed, and we coordinate with your plumber or AC contractor.
- 07
Verification and repairs
When the job calls for it, an independent licensed mold assessor performs post-remediation verification before containment comes down. Then repairs close the area up.
Shared walls
What should you do when mold appears on a wall you share with a neighbor?
Leave it alone, record it, and put the association and the neighbor on notice before anything is cleaned or cut. The order matters, because once the wall is opened the evidence of where the water came from is gone.
- 01
Do not scrub or paint it
Wiping dry growth puts spores into the room, and the EPA's advice is not to paint or caulk moldy surfaces. Close the door to the room if you can.
- 02
Photograph it with the date
Take wide and close photos of the wall, the baseboard, and the floor. Note any smell, staining, or dampness and when you first saw it.
- 03
Notify the association in writing
An email to the management office creates a dated record and lets them check the common plumbing in that wall.
- 04
Ask the neighbor to check their side
The water heater, the air handler, and the supply valves on the other side of the wall are the usual sources. A leak there may still be running.
- 05
Get moisture readings
Our free inspection maps how far the damp area runs and which direction it came from. Where we are given access, the other unit is measured as well.
- 06
Keep each unit's paperwork separate
Each owner and the association will deal with a different insurer. We write up each unit and the common wall on their own, so nobody is waiting on someone else's file.
Insurance
Is mold remediation covered by insurance in Florida?
Sometimes, and usually with a limit. Florida homeowners and condo policies generally pay for mold only when it results from a water loss the policy covers, and many cap the amount. The figures are on your declarations page and in the mold endorsement.
-
The cause comes first
An adjuster starts with the water, not the mold. Growth that follows a sudden pipe break is treated very differently from growth caused by humidity or a drip that went on for months.
-
The mold limit
Many policies set a fixed sub-limit for mold, fungus, or rot that is far lower than the dwelling coverage. Some offer a higher limit as an add-on. Your agent can tell you which you have.
-
Unit owner or association
In a condo, your HO-6 policy generally covers the finishes inside your unit and the master policy covers the structure. Mold in a shared wall can involve both.
-
Report it on time
Florida law bars a property claim unless notice is given within one year of the date of loss, and policies ask for prompt notice on top of that.
-
What we provide
Photos, moisture readings, the identified source, and an itemized scope. For covered claims, we bill your insurance company directly. See insurance claims.
After a leak
How soon does mold grow after a water leak?
The EPA's guidance is that when wet materials are dried within 24 to 48 hours of a leak, mold will not grow in most cases. Past that window the risk climbs, and it climbs fastest in a closed unit with the air conditioning off.
-
The first two days
This is when extraction and drying do the most good. A leak found and dried the same day rarely becomes a mold job.
-
Materials that go first
Paper-faced drywall, carpet pad, and the particleboard in cabinet bases hold water and feed growth. Tile, block, and concrete are slower to grow mold but keep the materials touching them damp.
-
A unit nobody is living in
With no one home, a leak is not found for weeks, and warm, still, humid air does the rest. This is the usual history behind the larger jobs in the 55+ communities.
-
Dry on the surface only
A wall that feels dry can still be wet inside. If a past leak was dried with household fans, a meter reading is the only way to know whether the cavity dried too.
-
If the window has passed
Do not assume the worst, and do not open the wall yourself. Have it measured first; the readings decide whether anything needs to come out.
Cost
What does mold remediation cost in Sunrise?
The price follows the area that has to be contained and the material that has to be removed. In a condo it also depends on how many units are affected and who is paying for which part. The inspection and the written scope are free.
-
One wall or several rooms
A single shared wall behind a water heater is a small containment. Growth spread lightly through a closed-up unit is a bigger job, mostly cleaning.
-
Both sides of the wall
When two units are affected, each side has its own containment and its own scope. Each owner, or the association, is billed for its part.
-
Cabinets and built-ins
Kitchen and vanity cabinets against a wet wall often have to come out to reach it. Particleboard boxes with growth are replaced; solid wood can usually be cleaned.
-
Contents
Furniture, clothing, and stored items in an affected room may need cleaning. Hard surfaces clean well; the EPA notes that absorbent materials may have to be discarded.
-
Testing and verification
If your association or insurer requires an assessor's protocol or a clearance report, the assessor bills for that separately from the remediation.
★ Every job is documented: photos, readings, and an itemized scope.
Insurance
Does homeowners insurance cover mold remediation?
Coverage for mold usually follows the cause. If growth came from a sudden, covered water loss, such as a burst pipe, remediation may be covered as part of that claim. Mold from long-term leaks, ongoing humidity, or deferred maintenance is commonly excluded, so check your policy's mold and water exclusions.
Many Florida policies also cap mold coverage at a set dollar amount, separate from the rest of a water claim, so look for a mold limit in your policy. We document the growth, the moisture source, the containment, and every removed material with photos and readings, so your adjuster can see what was found and why the work was needed. For covered claims, we bill your insurance company directly.
Usually covered
- Sudden pipe bursts and supply-line failures
- Water heater ruptures
- Toilet, sink, and tub overflows
- Appliance and AC overflows
- Burst or accidentally discharged fire sprinklers
- Water that enters through storm damage to the roof or windows
- Mold caused by a covered water loss, often up to a set limit
What we document
- Source of the loss and affected areas
- Daily moisture readings and equipment logs
- Thermal images of hidden moisture
- Every material removed, and why
- Each condo unit and common area, documented separately
- Dated photos and an itemized scope of work
Carriers we've worked with: Citizens Property Insurance, Universal Property & Casualty, Tower Hill Insurance, State Farm, Allstate, USAA, and many more. We are not affiliated with or endorsed by any insurance company.
Coverage decisions belong to your insurer and depend on your policy. Florida does not allow assignment of benefits on property policies issued on or after January 1, 2023, so you stay in control of your claim.
How water damage claims work in FloridaFAQ
Mold Remediation in Sunrise: questions
The mold is on my side of the wall, but the leak was next door. Who pays?
Usually more than one party. Under Florida's condominium statute, each owner generally insures the finishes inside their own unit and the association insures the building, whatever the source. Whether the neighbor or their insurer owes you anything depends on your documents and the facts, which is why a written record of the source matters.
Does the association have to approve mold work inside my unit?
Ask management before work starts. Many associations want notice, proof of the contractor's license and insurance, and set hours for work, and they need to be involved whenever a shared wall or common pipe is opened. We are licensed and insured and can send the paperwork they ask for.
What does the free mold inspection in Sunrise include?
A visual check for growth, moisture readings in the surrounding walls, floors, and cabinets, thermal imaging where it helps, and a written scope of the work. It does not include lab analysis; sampling is a separate service performed by a Florida-licensed mold assessor.
Do you remove mold in commercial spaces?
Yes. Tenant spaces, offices in the Sawgrass corporate parks, and common areas of condo buildings are handled with the same containment and cleaning, with records kept by suite. See commercial restoration.
Nearby
More mold remediation coverage
Mold Remediation city guides
- Mold Remediation in Boca Raton Palm Beach County
- Mold Remediation in Coral Springs Broward County
- Mold Remediation in Fort Lauderdale Broward County
- Mold Remediation in Miami Miami-Dade County
- Mold Remediation in Pompano Beach Broward County
- Mold Remediation in West Palm Beach Palm Beach County
- Mold Remediation in Boynton Beach Palm Beach County
Service areas near Sunrise
- Water damage restoration in Plantation Broward County
- Water damage restoration in Weston Broward County
- Water damage restoration in Davie Broward County
- Water damage restoration in Coral Springs Broward County
Don't wait. Go with the pros.
Need mold remediation help in Sunrise?
Call the 24/7 line. We will help you stop the source, tell you what to move, and get a crew scheduled. Not urgent? Send a request and we will call you back.
Call 24/7 (954) 289-0566- 1 We answer 24/7, day or night
- 2 We help you stop the water and protect belongings
- 3 We schedule a crew and tell you when to expect them
On call 24/7
Free inspection
Schedule a no-cost on-site inspection. A restoration specialist will contact you within a few minutes to confirm the details.
Request received
Thank you. A restoration specialist will contact you at the number provided to confirm the details. If water is still coming in, call now and we'll walk you through shutting it off.
(954) 289-0566