Emergency line answered 24/7

Serving Miami-Dade, Broward & Palm Beach counties

info@restorationusa.com
Call (561) 247-9488 Request service

Emergency line answered 24/7

Mold Remediation · Boynton Beach, FL

Mold removal for Boynton Beach villas, condos, and seasonal homes

A villa shut from May to October, a water heater that let go while the owners were up north, a townhome ceiling under a leaking washer: mold in Boynton Beach has usually had months to grow before anyone sees it. We deal with the moisture first, then the growth.

  • 24/7 emergency line
  • IICRC Certified Firm
  • Insurance claim documentation

On call 24/7

Free inspection

Schedule a no-cost on-site inspection. A restoration specialist will contact you within a few minutes to confirm the details.

Enter your name.

Enter a 10-digit phone number.

Enter a 5-digit zipcode.

Choose the type of damage.

Suspect you have mold? Call (561) 247-9488 to speak with a restoration specialist right away. Our specialists are standing by and on call 24/7.

Recognized by

  • Angi Super Service Award 2025
  • Thumbtack Top Pro 2026
  • 30+ YEARS OF INDUSTRY EXPERIENCE
  • Expertise.com Best Water Damage Restoration Services in Pompano Beach 2026
  • IICRC Certified Firm

Mold Remediation in Boynton Beach

Much of Boynton Beach empties out for the summer, and that is when its mold grows. An attached villa in Leisureville or a condo in one of the west Boynton 55+ communities sits closed through the most humid months of the year. If the air conditioning is off, or a toilet valve or water heater is leaking, the owner comes back in the fall to spotted closet walls and a smell that was not there in the spring.

Mold remediation here follows a set order. We start with a free mold inspection: a look for visible growth, moisture readings in the walls, floors, and cabinets, and thermal imaging to find anything still wet. Then the moisture is stopped, the area is sealed off, materials with growth are removed, and what remains is cleaned and dried. You get the scope in writing before work starts.

Because so many homes here are attached, we check the neighbor's side of a shared wall when we are given access, and we bring in the association or club where its walls or pipes are involved. If a leak is still active, water damage restoration in Boynton Beach is planned with the mold work.

Restoration USA holds Florida Mold Remediator License MRSR438. When you need lab results, a Florida-licensed mold assessor performs the testing, and we arrange it; the assessor is independent of our remediation work.

Your family's health

Is mold in your home a health risk?

It can be. The CDC says damp, moldy conditions can cause a stuffy nose, sore throat, coughing or wheezing, burning eyes, or a skin rash in some people, and people with asthma or mold allergies may have severe reactions.

As mold grows, it releases spores into the air your family breathes. Take extra care when there are babies or young children in the home: the CDC points to a potential link between early mold exposure and asthma developing in some children.

Book the free mold inspection as soon as you suspect mold. The sooner the moisture is fixed and the growth is gone, the shorter everyone is exposed and the smaller the job. Until then, keep children and anyone sensitive out of the affected area.

We are restoration professionals, not doctors. If anyone in your home has symptoms, talk to your doctor or pediatrician. Sources: CDC: Mold and your health, EPA: A Brief Guide to Mold, Moisture and Your Home.

Local factors

What's different about mold remediation in Boynton Beach

  • Attached 55+ villas and condos

    In Leisureville, Sterling Village, and the newer communities along Jog Road and Hagen Ranch Road, units share walls. Growth that starts at one owner's water heater can be found on the other side of the wall, so both homes are checked.

  • Country club homes

    In Hunters Run, Quail Ridge, and Indian Spring, larger homes have more places for a slow leak to hide: wet bars, second AC systems, and pool baths. Clubs commonly want contractor registration and gate clearance, so tell us what yours requires when you call.

  • Townhomes with upstairs laundry

    At Renaissance Commons and similar communities, a washer hose or pan leak upstairs wets the floor system and the ceiling below. Growth inside that cavity is found with a thermal camera and reached from the ceiling side.

  • Homes near the Intracoastal

    In Coquina Cove, Golfview Harbour, and the older block homes east of I-95, ground floors and garages that took on tidal water can grow mold inside the wall bottoms. Drywall that soaked up that water is cut out above the water line.

Our process

How does mold remediation work?

  1. 01

    Inspect and find the moisture

    We inspect for visible growth and use moisture meters and thermal imaging to find wet materials and what is wetting them: a leak, condensation, or an old water loss that never dried.

  2. 02

    Build containment

    The work area is sealed with plastic sheeting and zippered doors. Larger jobs get an entry chamber so crews can come and go without carrying spores out.

  3. 03

    Negative air and HEPA scrubbing

    HEPA-filtered air machines draw air out of the containment, keeping it under negative pressure so air flows in, not out, while the work is underway.

  4. 04

    Remove contaminated materials

    Drywall, insulation, carpet, and other porous materials with growth are cut out, bagged inside the containment, and taken out of the building.

  5. 05

    Clean what stays

    Framing, block, and other solid surfaces are HEPA-vacuumed and wiped. Stained wood is sanded or wire-brushed, and a final HEPA vacuuming collects settled dust.

  6. 06

    Dry and correct the cause

    Remaining materials are dried to normal readings. The moisture source has to be repaired before walls are closed, and we coordinate with your plumber or AC contractor.

  7. 07

    Verification and repairs

    When the job calls for it, an independent licensed mold assessor performs post-remediation verification before containment comes down. Then repairs close the area up.

The process

What happens during mold remediation?

Six stages, always in this order: inspect, stop the moisture, contain, remove, clean, and dry. Most of the visible work is in the middle, but the first two stages decide whether the mold stays gone.

  1. 01

    Inspection and written scope

    We map the growth and the wet materials around it and write down what will be removed, what will be cleaned, and what it will cost. This visit is free.

  2. 02

    The moisture is stopped

    The leak is repaired or the humidity problem corrected before any removal. If a plumber, roofer, or AC contractor is needed, we tell you which and why.

  3. 03

    The area is sealed

    Plastic sheeting closes off the work area, and a HEPA-filtered air machine keeps it under negative pressure so dust and spores are pulled away from the rest of the home.

  4. 04

    Materials with growth come out

    Moldy drywall, insulation, carpet pad, and swollen cabinet parts are cut out, bagged inside the containment, and taken away.

  5. 05

    What stays is cleaned

    Framing, block, concrete, and tile are cleaned in detail, following the IICRC S520 standard for mold remediation.

  6. 06

    Drying and verification

    The structure is dried to normal readings before anything is closed up. If your association, insurer, or buyer wants post-remediation verification, an independent licensed mold assessor performs it.

Seasonal homes

How do you keep mold out of a Boynton Beach home that is closed for the summer?

Keep the air dry, shut the water off, and have someone look in. The EPA advises holding indoor humidity below 60 percent, and a closed Florida home will not stay there on its own from June to October.

  • Leave the air conditioning running

    Turning it off to save on electricity is a common cause of a whole-home mold problem. A moderate setting, or a humidistat that runs the system when the air gets damp, keeps the house dry.

  • Have the AC serviced before you go

    A clogged condensate line will overflow with nobody there to notice. The EPA also recommends keeping drip pans clean and drain lines flowing.

  • Close the main water valve

    With the water off, a failed toilet valve, water heater, or ice-maker line cannot flood the home or the one attached to it. Turn the water heater off as well.

  • Arrange regular checks

    A house watcher, neighbor, or relative should walk through every week or two, look in the AC closet and under the sinks, and note any smell.

  • Give the association your contact details

    If a neighbor reports a stain or water at your door, management needs to reach you the same day and needs to know who has a key.

Comparing quotes

How do you compare mold remediation quotes in Boynton Beach?

Compare what each quote includes before you compare the totals. A low price that leaves out containment, the moisture repair, or cleaning of the air conditioning is a quote for a smaller job, and it can mean paying for the work twice.

  • Does it name the moisture source?

    A quote that lists square feet of drywall but says nothing about why the wall was wet is incomplete. Ask what caused the growth and how that will be fixed.

  • Is the company licensed for it?

    Florida requires a mold remediator license for jobs over 10 square feet. Look the number up on the state license search; ours is MRSR438.

  • Is containment in the price?

    Sealing the area and filtering the air is what keeps the rest of the home clean during removal. If it is not written into the quote, ask.

  • Who tested, and who is fixing?

    Be wary when the same company finds the mold with a lab test and then quotes the removal. Florida law keeps the assessor and the remediator separate on one property for 12 months.

  • Is it itemized?

    An itemized scope lets you, your adjuster, and a second contractor see exactly what is being done. Ours comes with the free inspection.

Cost

How much should you pay for mold remediation in Boynton Beach?

Enough to cover the full job and no more: the containment, the removal, the cleaning, and the drying, each listed. We do not quote a figure before seeing the home, because two villas with the same floor plan can be very different jobs.

  • How long the home sat

    A leak found within days affects one wall. A summer of high humidity affects every closet, and the work shifts from demolition to cleaning many surfaces and contents.

  • Attached or detached

    In a villa or condo, growth that crossed a shared wall means a second containment in the neighboring home, scoped and billed on its own.

  • What has to be removed

    Drywall and insulation are inexpensive to replace. Kitchen cabinets, built-in closets, and flooring that must come out to reach a wall cost more to put back.

  • The AC system

    If growth is inside the air handler or the ducts near it, those parts are added to the scope so the system does not spread it again.

  • Your policy's mold limit

    Insurance may pay up to the mold limit when the cause was a covered water loss. Ask your agent for the figure, and see how we handle insurance claims.

Technician photographing a water-stained wall with a tablet and holding a moisture meter to document the loss for insurance

★ Every job is documented: photos, readings, and an itemized scope.

Insurance

Does homeowners insurance cover mold remediation?

Coverage for mold usually follows the cause. If growth came from a sudden, covered water loss, such as a burst pipe, remediation may be covered as part of that claim. Mold from long-term leaks, ongoing humidity, or deferred maintenance is commonly excluded, so check your policy's mold and water exclusions.

Many Florida policies also cap mold coverage at a set dollar amount, separate from the rest of a water claim, so look for a mold limit in your policy. We document the growth, the moisture source, the containment, and every removed material with photos and readings, so your adjuster can see what was found and why the work was needed. For covered claims, we bill your insurance company directly.

Usually covered

  • Sudden pipe bursts and supply-line failures
  • Water heater ruptures
  • Toilet, sink, and tub overflows
  • Appliance and AC overflows
  • Burst or accidentally discharged fire sprinklers
  • Water that enters through storm damage to the roof or windows
  • Mold caused by a covered water loss, often up to a set limit

What we document

  • Source of the loss and affected areas
  • Daily moisture readings and equipment logs
  • Thermal images of hidden moisture
  • Every material removed, and why
  • Each condo unit and common area, documented separately
  • Dated photos and an itemized scope of work

Carriers we've worked with: Citizens Property Insurance, Universal Property & Casualty, Tower Hill Insurance, State Farm, Allstate, USAA, and many more. We are not affiliated with or endorsed by any insurance company.

Coverage decisions belong to your insurer and depend on your policy. Florida does not allow assignment of benefits on property policies issued on or after January 1, 2023, so you stay in control of your claim.

How water damage claims work in Florida

FAQ

Mold Remediation in Boynton Beach: questions

I came back for the season and found mold. What should I do before you get here?

Leave things as they are and take photos. Do not run fans across the growth or wipe it dry. Turn the air conditioning on if the growth is not inside the unit itself, shut off the water if anything is leaking, and let the association know. Then call us for the free inspection.

Is there such a thing as free mold remediation in Boynton Beach?

The inspection and the written scope are free. The remediation itself is not, but your insurance may pay for some or all of it when the mold follows a covered water loss, up to the mold limit on your policy. For covered claims, we bill your insurance company directly.

Can furniture and clothing that smell of mold be saved?

Often, depending on the material. Hard furniture, glass, metal, and most washable clothing clean up well. The EPA notes that absorbent or porous materials may have to be thrown away if they become moldy, and that applies to items like upholstered cushions and mattresses with visible growth.

Does my HOA or club need to know about mold in my home?

Yes, if the growth is on a shared wall, near common plumbing, or in a unit attached to others, because the source may be on their side or the damage may have spread. Check your documents for notice requirements. We give the association the same written findings you receive.

Nearby

More mold remediation coverage

Service areas near Boynton Beach

Don't wait. Go with the pros.

Need mold remediation help in Boynton Beach?

Call the 24/7 line. We will help you stop the source, tell you what to move, and get a crew scheduled. Not urgent? Send a request and we will call you back.

Call 24/7 (561) 247-9488
  1. 1 We answer 24/7, day or night
  2. 2 We help you stop the water and protect belongings
  3. 3 We schedule a crew and tell you when to expect them

On call 24/7

Free inspection

Schedule a no-cost on-site inspection. A restoration specialist will contact you within a few minutes to confirm the details.

Enter your name.

Enter a 10-digit phone number.

Enter a 5-digit zipcode.

Choose the type of damage.

Suspect you have mold? Call (561) 247-9488 to speak with a restoration specialist right away. Our specialists are standing by and on call 24/7.

Recognized by

  • Angi Super Service Award 2025
  • Thumbtack Top Pro 2026
  • 30+ YEARS OF INDUSTRY EXPERIENCE
  • Expertise.com Best Water Damage Restoration Services in Pompano Beach 2026
  • IICRC Certified Firm
Call 24/7 (561) 247-9488 Request service